Own plant in Dongguan · Shipping to 50+ countries

Custom silicone & PVC parts, made simple.

We mould labels, keypads, keychains, character sleeves, figures, seals and waterproof accessories from 100 pieces, with tooling cut in-house so a design change does not cost you three weeks.

Get a quote See all products

Multi-nozzle dispensing head laying beads of coloured silicone into an aluminium mould cavity. — Our floor, Dongguan — colour going into the cavity.

What we commit, in numbers:

MOQ 100 pcs · sampling 3–7 days
1,800 m² plant · 30+ presses · 10+ CNC
15,000 pcs/day capacity
Tolerance ±0.1 mm typical
Third-party testing arranged per order

Products

Nine things we mould, none of them ranked

Every category runs on the same plant and the same QC. Pick the one closest to your product — each page carries its own spec table, MOQ and lead time.

Line illustration of an oval silicone label with a punched hole and two lines of debossed text

Silicone Labels & Patches MOQ 100 pcs · Sampling 3–7 days · 0.8–3 mm thick Illustration · photo pending

Line illustration of a 3 by 3 silicone keypad with a raised actuation key in the centre

Silicone Keypads & Buttons MOQ 500 pcs · 1–5M cycles · Shore A 30–70 Illustration · photo pending

PVC Santa Claus keyring with a printed silicone strap and a split ring, front view on white

Charms & Keyrings MOQ 100 pcs · 2D or 3D · Pantone matched

Blue silicone earbud case moulded as a cat head, with moulded ears, printed eyes and a loop.

Character Sleeves One-piece moulded · Shore A 20–60 · Soft-touch / matte

Dark navy silicone figure moulded as a penguin, with a printed white belly, printed eyes and yellow moulded feet.

Silicone Figures MOQ 100 pcs · Shore A 10–60 · Moulded or printed colour

Line illustration of a stylised character figure made from licensed artwork, marked IP

Silicone IP Characters NDA before artwork · 2D → 3D modelling · MOQ 200 pcs Illustration · photo pending

Line illustration of a rotocast PVC figure with the mould parting line called out

PVC & Soft Vinyl Figures Solid PVC or rotocast · MOQ 500–3,000 · Sharp multi-colour detail Illustration · photo pending

Line illustration of an O-ring with cross-section callout plus a flat gasket and washer below

Silicone Seals & Gaskets −40 to 230 °C · Moulded / extruded / die-cut · MOQ from 500 Illustration · photo pending

Line illustration of a water droplet beside a stack of sealing plug and compression cap

Waterproof Accessories IPX8 / 3 m depth · TPU or PVC · MOQ 500 pcs Illustration · photo pending

Colour in the cavity
Out of the press
Five colours, one part

Shot on our own floor in Dongguan, October 2026 — not stock photography. Backgrounds are unedited; we do not stage the plant for a camera. More from the floor.

Find it by what you are making

Six ways buyers arrive here

Apparel & branding Silicone labels and 3D patches with sew-on, heat-transfer or adhesive backing. Consumer electronics Character sleeves, cases and soft-touch covers that fit your device. Industrial sealing Gaskets, O-rings and profiles rated −40 to 230 °C. Brand gifts & promo Keychains and charms from 100 pcs, Pantone matched. Figures & IP Figures and mascots from 2D artwork, NDA signed before we look. Outdoor & waterproof IPX8 pouches and cases in TPU or PVC.

How it works

Four steps, no mystery

Most first orders go from enquiry to shipped carton in five to six weeks. The clock starts when you approve a physical sample.

See the process in detail

Send the enquiry Drawing, sample or just a description. Attach a file if you have one.
DFM and quote We come back with a quote, tooling cost and any manufacturability notes.
Sample 3–7 days once the tool is cut. You approve a physical part, not a picture.
Production and QC 15–20 days after sample approval. 100% in-line inspection before packing.

Why buyers stay

Four things we do differently

Tooling in-house

CNC engraved and polished on site, so a change to the shape does not queue behind another factory's order.

100 pieces is a real order

Not a sample allowance. Trial runs at MOQ carry the same QC as a 50,000-piece run.

Testing per order

We do not hold factory certificates. We arrange third-party testing so your report covers your batch.

NDA before artwork

Signed before we see a style guide. Your mould is never used for another customer.

Inside the plant

Five stages, and what can go wrong at each

1 · Tooling

Steel mould CNC engraved then polished. Undercuts are checked here — they are cheap to fix now and expensive later.

2 · Compounding

HCR silicone pigmented to a Pantone chip. Colour is approved on a cured chip, not on a screen.

3 · Moulding

Compression moulding under heat and pressure. Wall thickness and web thickness decide how a keypad feels.

4 · Deflashing

Hand trimmed. Flash on a visible edge is the most common defect we reject for.

5 · Post-curing

200 °C for 2 hours, which drives off residual volatiles so the part does not smell in a sealed bag.

Then · 100% inspection

Dimension, colour, logo, fit and function checked in line, not sampled after the fact.

How we inspect

Resources

Before you ask for a quote

These are the questions buyers actually send us. Answering them here saves everyone a week.

Comparison Silicone vs PVC for custom products 8 min read Comparison PVC vs vinyl vs resin vs ABS for figures 7 min read Comparison Soft PVC vs silicone figures 6 min read

Send your spec, get a quote

Tell us what you need and how many. within 1 business day (GMT+8) — usually much sooner. If you already have a drawing or 3D file, attach it and skip the back-and-forth.