Capabilities

Quality control

We do not hold a factory certificate. What we do is inspect every part in line and arrange third-party testing for the batch you order — which is what most buyers actually need, because a certificate states what a factory can do, not what arrived in your carton.

Six checkpoints

Incoming material Compound lot recorded against the order. Colour checked against the approved chip before it goes to a press.
First article The first good part is measured and photographed, then held. You get the photo; if you want the part, we ship it.
In-process patrol Dimension and appearance checked through the run, not only at the end. Flash and short shots are caught at the press.
Post-cure verification Temperature and dwell logged — 200 °C for 2 hours. This is the step that stops complaints about smell.
Final inspection 100% in-line on dimension, colour, logo, fit and function. Sampled AQL 2.5 where 100% is impractical.
Packing check Quantity, polybag, carton marking and carton drop condition before the box is sealed.

What we measure, and with what

Characteristic	Method
Dimension	Calipers and profile projector against the drawing
Hardness	Shore A durometer, ASTM D2240, on every batch
Colour	Visual match to the approved cured chip under daylight lamp
Logo and legend	Registration and legibility check, plus rub test on printed legends
Function	Peak force and snap ratio on keypads; leak check on seals and pouches
Appearance	Flash, short shots, flow marks, bubbles — 100% visual
Odour	Sealed-bag check after post-curing

When you need a lab report

We arrange third-party testing through SGS, Intertek or BV depending on your market. Typical combinations and what they cost:

Market	Combination	Typical cost	Days
United States	ASTM F963 + CPSIA	$300–800	7–14
European Union	EN71-1/2/3 + REACH	$400–900	10–15
Canada	CCPSA	$300–700	7–14
Australia	AS/NZS ISO 8124	$300–700	10–14

One rule worth knowing: a Children’s Product Certificate must be issued by the importer, not the factory. We can supply the test report from a CPSC-accepted laboratory; only you can sign the CPC. Any supplier offering to "give you a CPC" misunderstands the rule.

Send your spec, get a quote

Tell us what you need and how many. within 1 business day (GMT+8) — usually much sooner. If you already have a drawing or 3D file, attach it and skip the back-and-forth.